Internet

Speed Test requires at least version 8 of Flash. Please update your client.
1. For accurate results, please do not use your Internet connection for other applications when running the speedtest.
2. Approximately 1000 kbps (kilobits per second) = 1Mbps (megabits per second).

1. Connect laptop/PC to IP phone (LAN port)
2. Connect wall socket to IP phone (WAN port)
3. Switch on IP phone power adapter
4. Alternatively, connect laptop/PC directly to wall socket
5. Open your browser and go to any site e.g. www.yahoo.com
6. You will be redirected to ie.net.my login page




7. Key in your username and password
8. Click submit
9. You will be redirected to ie.net.my homepage
10. Happy surfing!

1. Login with your username and password via top right hand corner of www.ie.net.my
2. Click View Usage from main menu
3. Click "+" at the "Internet usage for your name" to expand
4. Total usage and amount charge is shown

1. Login with your username and password via top right hand corner of www.ie.net.my
2. Click Options \ Settings from main menu
3. Select a idle time out period (by default, idle time out is set to 30 minutes)
4. Click Update button

1. Click logout button at the pop up status window
2. If your pop up blocker is on and there is no status window, point your browser to http://1.1.1.1 and hit enter
3. If you are using Microsoft Internet Explorer 7, click yes to show non secure items




4. You will see this logout successful message

1. Place the router in a central location, making sure it's not surrounded by metal. (A signal can't be obtained through metal.) The router should be located so that the distance between clients (computers) is somewhat equal. This will create a better connection
2. Plug the Ethernet cable into the "Internet" or "WAN" port on the back of the wireless router.
3. Connect a computer to the router by plugging another Ethernet cable into the Ethernet port on your computer and attaching the other end to one of the available ports on the back of the router. You can choose any port except the one labeled "WAN."
4. Plug the router into an electrical outlet.
5. Wait for the power light to stop flashing, at which time the router is finished booting up. While the router is booting, the power light will be blinking. This process may take a few minutes to complete
6. Reboot your computer so it can access a new IP address from the router through the Dynamic Host Configuration Protocol (DHCP).

1. Open your web browser, type " http://192.168.1.1/ " into the address bar and hit "Enter."
2. Use "Admin" as the username in the pop-up box and leave the password blank
3. Connect to the Internet and click on "Internet Setup."
4. Select your connection type from the drop-down menu. Choose "DHCP" .
5. Set a service set identifier (SSID) to identify the router and change the password
6. Encrypt your wireless connection using a Wireless Encryption Protocol (WEP) key. Under the "Wireless Security" option, enter a passphrase and click "Generate." This will generate a password which will need to be used by any client connecting to your router.